阳光板上原有的胶带。仅为临时保护板材边缘所用，是不耐老化的，在安装工程中，按尺寸裁板，下料后必须用工程专用胶带按安装规程的要求密封板端孔格，把原来胶带替换下来。安装工程专用胶带应有很好的耐候性，长期使用而不丧失其粘结性和机械强度，安装操作时，贴胶带时。
The original tape on the sun board. It is only used to temporarily protect the edge of the plate, which is not resistant to aging. In the installation project, the plate shall be cut according to the size. After blanking, the plate end hole grid must be sealed with special engineering tape according to the requirements of the installation procedures, and the original tape shall be replaced. The special adhesive tape for installation works shall have good weather resistance, which can be used for a long time without losing its adhesion and mechanical strength. During installation operation, the adhesive tape shall be pasted.
要注意以下几点;
Pay attention to the following points;
(1)保证板材边缘型槽模具 一次性止血带 保定水处理设备 一次性止血带 保定空压机 北京真空泵都是光滑的。
(1) Ensure that the edge of the plate is smooth.
(2)要将所有孔吹干净，压缩空气必须是无任何杂质，干燥的。
(2) To blow all holes clean, the compressed air must be free of any impurities and dry.
(3)要保证用型材、金属盖板，端部的U形保护槽把胶带完全盖住，安装完成后，不应该有暴露的部分。
(3) Ensure to cover the tape completely with profile and metal cover plate and U-shaped protection groove at the end. After installation, there should be no exposed part